• Vag Com Release 409.1 Crack
• Kkl 409.1 Software Download

There is a simple script that will fool the VAG-COM 409.1. What you need: VAG-COM 409.1 release.exe Vag-Com 409.1 Cr.exe starter.bat. Seeds: 17Peers: 27VAG COM 409 download torrentThis software is tested on Windows 7 Ultimate k86 and works by following the instructions below. Click 'options', then choose the COM port number same as the COM port for the 'USB TO SERIAL' device and click test. Then you will see the Port status: OK. Vag com 409.1 download full version free Get file Click image for larger version vagcom1. Usb cable kkl vag-com 409. Select the com port within vag-com. Related items for 2013 latest version vag-link vw car diagnostic usb cables. Support for dual ecus, no, yes. Vag com usb diagnos. Vag-com vcds 2017 - obd2 diagnostic cable software (for vag vw, audi, seat, skoda). Download vag com 4091 crack full version free. Mac vag com vw free vag-com 3112 full vag com software freeware. Download vag com 409. Vimvip vag-com kkl 409. China vag-com obdii 409. Install outside the program files folder. Ikkegol kkl vag-com 409.

Home
Products
VCDS-Lite
Download
Current VersionVCDS-Lite

VCDS-Lite for all 3rd party and 'Dumb' Interfaces on 2005 or older VAG cars

VCDS-Lite is Copyright 2012 by Ross-Tech LLC / Uwe M. Ross. All rights are reserved.
De-compilation, disassembly, reverse-engineering, alteration, use as a reference tool for the purpose of developing a product with similar functionality, and re-distribution in any form without the prior written consent of the author is prohibited.
The unregistered shareware version of VCDS-Lite is free for non-commercial use, but no support of any kind is available. Use in a commercial environment requires registration.

Vag Com Release 409.1 Crack

By downloading this software, you acknowledge that this Program is provided 'as is' and 'with all faults, defects and errors' and that all use of the Program is at your own full risk. It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.

Instructions: If you have a HEX, KEY, KII, or Micro-CAN interface, you're on the wrong page. Please go here instead. Download the self-installing distribution file. Run it and follow the prompts to allow it to install itself. You must install VCDS-Lite on your PC's hard disk! It will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access. Connect an appropriate interface between the computer and the car. Ross-Tech does not supply interfaces for VCDS-Lite. VCDS-Lite works with some of our old interfaces from many years ago, as well as many 3rd-party interfaces. Turn the car's ignition switch ON. No need to start the engine. Start the VCDS-Lite program: Click [Options] and select the correct communicationsport. Use [Test] to confirm that the program can use the port and find the interface. Then [Save]. Now Play. Make sure the software can reliably access all the control modules that it should in your car. See our Application Charts. Read Fault Codes from some modules. In order to get access to some of the more advanced functions, will need to register and activate the software. The exact differences in functionality between the unregistered/shareware and registered/activated versions are summarized in this handy chart. Note to registered users updating from older versions: If you're updating from VCDS-Lite version 1.0 or 1.1 you should not need a new activation. Simply install VCDS-Lite in the same location and it should use your existing activation. If you're upgrading from an older version such as VAG-COM version 311 or 409, you will need a new activation. First, install the VCDS-Lite and test it thoroughly in shareware mode as described above. Then go here and fill out the appropriate form - or buy a license if you don't have one yet. Release Notes: VCDS-Lite works with most 3rd-party 'Dumb K-Line' interfaces as well as the following ancient low-tech Ross-Tech Interfaces, the last of which we sold early in 2004: ISO-COM, FAST-COM, MAX-COM, BI-COM, TWIN-COM, and UNI-COM. VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10. Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware. VCDS-Lite does NOT work on Windows RT Windows RT runs on devices with ARM (instead of x86) CPUs and normal Windows programs like VCDS-Lite simply do not work on them. The default installation folder is C:Ross-TechVCDS-Lite If allowed to install in the default location, it should not interfere with an existing Ross-Tech software on your PC. To remove older versions, simply delete the shortcuts from your Start menu and Desktop and delete the old folders which are normally: C:VAG-COM or C:VAG-COM-Beta or C:Program FilesVAG-COM or C:Program FilesVAG-COM-Beta

Download:

VCDS-Lite Release 1.2 Published 19. November 2012 Digitally Signed, Self-Installing EXE File ~1.5MB Includes the VC-Scope and TDI Timing Checker 'Plug-Ins'

Additional handy links:

Home
Products
VCDS-Lite
Download
Current VersionVCDS-Lite
The shareware version of Ross-Tech's VAG-COM package - version 409.1 - was written in 2004, and so was never designed to work with Windows 7.
Ross-Tech have since released VCDS-Lite, which is compatible with Windows Vista / 7, and so is a better option.
However, should you still wish to use VAG-COM 409.1, it can be made to do so if installed correctly, using the steps below.

VW Audi Seat Skoda USB Interface for VAG-COM 409.1 or VCDS Lite - most VAG 1996-2003

Stage 1: Install the USB drivers for the interface

To get your interface up and running, you need to install software device drivers for the USB interface.

If you are installing the package on a PC that is connected to the internet, Windows 7 can automatically locate and install suitable drivers via Windows Update.
Just connect the interface to a USB port on the computer - Windows will then show a notification that it is locating and installing device drivers...

...and then another message when the installation is complete...

If the PC you are installing on is not connected to the internet, you will need to download the drivers via another PC and install them before connecting the interface. Windows 7 compatible drivers are available here:

www.gendan.co.uk/download/gendandriver.exeStage 2: Verify the port settings

Once the drivers are installed, you need to determine which COM port has been assigned to the interface by Windows. To do this you need to go into the Windows Device Manager.
Find the 'Computer' link on the desktop or the Start Menu, click the Right Mouse Button on it and choose Properties:

When the 'System' box appears, click on the Device Manager link on the left hand side:

Then when the Device Manager window appears, click on the arrow next to 'Ports (COM & LPT)' to see which COM port has been assigned to your interface - it will show as a 'USB Serial Port':

VAG-COM 409.1 can only connect to a COM port between COM1 and COM4.
- If the port number assigned to your interface is between 1 and 4, remember which port it's on, then skip to stage 3 - installing VAG-COM.
- If the port number assigned to your interface is higher than 4 (in the example above it is COM8), then you will need to change the port number.
To do this, double-click on the USB Serial Port to go into its properties, then click on the Port Settings tab:

Then click on the 'Advanced' button - this will show you a list of all the COM port numbers you could assign to the interface. Select a port number between 1 and 4 then press ok (if possible choose one that is not shown as 'in use'):

Once that is done, click ok until you are back to the Windows desktop.

Stage 3: Download and install the VAG-COM Software

Kkl 409.1 Software Download

Next you need to download VAG-COM 409.1 from the Ross-Tech website:
www.ross-tech.com/vag-com/download/archives.html
(Use the link for version 409.1 - shown as 'For MODERN SERIAL Interfaces')
Save the file to your computer, then run it.
When installing VAG-COM on Windows 7, it is important that you do NOT install it within the 'Program Files' folder. Windows 7 protects this folder and prevents programs from writing files into it, which would prevent VAG-COM from working.
So when you see the screen showing the location for installation, change it to another folder, e.g. C:Ross-TechVAG-COM:

Once you have changed the installation location, click install, and wait for it to complete installation. The installer may not give a confirmation window - it may just disappear when it is finished.

Stage 4: Configure the VAG-COM software

Finally there are a few changes you need to make to get the software up and running.
VAG-COM requires administrator access to function, so find the shortcut to 'VAG-COM Release 409-1', click the Right Mouse Button on it, and choose Properties.
Then on the Properties page, select the 'Compatibility' tab, and tick the option marked 'Run this program as an administrator':

Click on 'Apply', then 'OK'.
You may need to repeat this for the shortcut on the Start Menu.

That should be all the preparation done. The final step is to open the VAG-COM software by that shortcut, go into the Options page, then select the COM port your interface is configured on:

Once you've selected the port, click Test, then OK. You should now be able to use the software.